Table of Contents
Advertisement
DAP-300P Wireless N300 PoE Access Point / Router
User Manual
Parameter
Protocol
Remote IP
Public port (start)/
Public port (end)
Private IP
Private port (start)/
Private port (end)
Click the APPLY button.
To edit the parameters of an existing server, select the relevant line in the table. On the opened page,
change the needed parameters and click the APPLY button.
To remove a server, select the checkbox located to the left of the relevant line of the table and click
the DELETE button (
A protocol that will be used by the new virtual server. Select a value
from the drop-down list.
Public Network Settings
Enter the IP address of the server from the external network.
To add one more IP address, click the ADD REMOTE IP button and
enter the address in the displayed line.
To remove the IP address, click the Delete icon ( ) in the line of
the address.
A port of the access point from which traffic is directed to the IP
address specified in the Private IP field in the Private Network
Settings section. Specify the start and the end value for the port
range. If you need to specify one port, enter the needed value in the
Public port (start) field and leave the Public port (end) field
blank.
Private Network Settings
The IP address of the server from the local area network. To choose
a device connected to the access point's LAN at the moment, select
the relevant value from the drop-down list (the field will be filled in
automatically).
A port of the IP address specified in the Private IP field to which
traffic is directed from the Public port. Specify the start and the
end value for the port range. If you need to specify one port, enter
the needed value in the Private port (start) field and leave the
Private port (end) field blank.
). Also you can remove a server on the editing page.
Page 148 of 175
Configuring via Web-based Interface
Description
Advertisement
Table of Contents
