Tr-069 Client - D-Link DAP-300P User Manual

DAP-300P Wireless N300 PoE Access Point / Router
User Manual

TR-069 Client

This page is available if the Router or WISP Repeater mode was selected in the Initial
Configuration Wizard.
On the Advanced / TR-069 Client page, you can configure the access point for communication
with a remote Auto Configuration Server (ACS).
The TR-069 client is used for remote monitoring and management of the device.
You can specify the following parameters:
Parameter
Interface
Enable TR-069 Сlient
Figure 111. The page for configuring the TR-069 client.
TR-069 Client
The interface which the access point uses for communication with
the ACS. Leave the Automatic value to let the device select the
interface basing on the routing table or select another value if
required by your ISP.
Move the switch to the right to enable the TR-069 client.
Page 132 of 175
Configuring via Web-based Interface
Description