Client - D-Link DAP-300P User Manual

DAP-300P Wireless N300 PoE Access Point / Router
User Manual

Client

On the Wi-Fi / Client page, you can configure the access point as a client to connect to a wireless
access point or to a WISP.
To configure the access point as a client, move the Enable switch to the right. Upon that the
following fields are displayed on the page:
Parameter
Broadcast wireless
network 2.4 GHz
Connecting to network
In the Wireless Networks section, the list of available wireless networks is displayed. To view
the latest data on available wireless networks, click the UPDATE LIST button.
To connect to a wireless network from the list, select the needed network. Move the Network
options switch to the right to view more detailed information on the network to which the access
point connects. If a password is required, enter it in the relevant field. Click the CONNECT button.
To connect to a hidden network, select the Connect to hidden network value from the
Connecting to network drop-down list. Enter the name of the network in the Network name
(SSID) field. If needed, fill in the BSSID field. Then select the needed type of authentication from
the Network authentication drop-down list.
Figure 92. The page for configuring the client mode.
If the switch is moved to the left, devices cannot connect to the
access point's WLAN. Upon that the access point can connect to
another access point as a wireless client.
A method for connecting to another access point.
Page 106 of 175
Configuring via Web-based Interface
Description