D-Link DAP-300P User Manual page 39

DAP-300P Wireless N300 PoE Access Point / Router
User Manual
The Device Information section displays the model and hardware version of the access point, the
firmware version, and other data.
To contact the technical support group (to send an e-mail), left-click the support e-mail address.
After clicking the line, the e-mail client window for sending a new letter to the specified address
opens.
To change the operation mode of the device, left-click the name of the mode in the Device mode
line. In the opened window, click the initial setup wizard link (for the detailed description of the
Wizard, see the Initial Configuration Wizard section, page 43).
The Wi-Fi 2.4 GHz section displays data on the state of the device's wireless network, its name and
the authentication type, and availability of an additional wireless network.
In the WAN section, data on the type and status of the existing WAN connection are displayed.
In the LAN section, the IPv4 and IPv6 address of the access point, the LAN MAC address, and the
number of wired and wireless clients of the device are displayed.
The LAN Ports section displays the state of the device's LAN port and its data transfer mode.
The Yandex.DNS section displays the Yandex.DNS
the Yandex.DNS service, move the Enable switch to the right.
mode of the service.
service state and operation mode. To enable
Page 39 of 175
Installation and Connection
If needed, change the operation