Table of Contents
Advertisement
DAP-300P Wireless N300 PoE Access Point / Router
User Manual
Parameter
Type
Level
Server
Port
After specifying the needed parameters, click the APPLY button.
To disable logging of the system events, move the Enable switch to the left and click the APPLY
button.
Logging
Select a type of logging from the drop-down list.
•
Local: the system log is stored in the access point's memory.
When this value is selected, the Server and Port fields are
not displayed.
•
Remote: the system log is sent to the remote host specified in
the Server field.
•
Remote and local: the system log is stored in the access
point's memory and sent to the remote host specified in the
Server field.
Select a type of messages and alerts/notifications to be logged.
The IP or URL address of the host from the local or global network,
to which the system log will be sent.
A port of the host specified in the Server field. By default, the value
514 is specified.
Page 158 of 175
Configuring via Web-based Interface
Description
Advertisement
Table of Contents
