Table of Contents
Advertisement
DAP-300P Wireless N300 PoE Access Point / Router
User Manual
In the opened window, you can specify the following parameters:
Parameter
Enable rule
Action
MAC address
Hostname
After specifying the needed parameters, click the SAVE button.
To edit a rule, select the relevant line in the table. In the opened window, change the needed
parameters and click the SAVE button.
To remove a rule, select the checkbox located to the left of the relevant line of the table and click
the DELETE button (
Move the switch to the right to enable the rule.
Move the switch to the left to disable the rule.
Select an action for the rule.
•
Deny: Blocks access to the Internet for the device with the
specified MAC address even if the default mode allows
access for all devices.
•
Allow: Allows access to the access point's network and to
the Internet for the device with the specified MAC address
even if the default mode denies access for all devices.
The MAC address of a device from the access point's LAN. You can
enter the MAC address of a device connected to the access point's
LAN at the moment. To do this, select the relevant device from the
drop-down list (the field will be filled in automatically).
The name of the device for easier identification. You can specify
any name.
). Also you can remove a rule in the editing window.
Page 123 of 175
Configuring via Web-based Interface
Description
Advertisement
Table of Contents
