Table of Contents
Advertisement
DAP-300P Wireless N300 PoE Access Point / Router
User Manual
Parameter
Basic connection
Backup connection
Test host
Check interval
Timeout check
Number of inspections
of active connection
Number of inspections
of inactive connection
When all needed settings are configured, click the APPLY button.
From the drop-down list, select a WAN connection which will be
used as the main one.
From the drop-down list, select a WAN connection which will be
used as the reserve one.
An IP address that the access point will check for availability via
ICMP ping mechanism.
A time period (in seconds) between attempts to check the status of
the main connection. By default, the value 10 is specified.
A time period (in seconds) for an attempt to check the status of the
main connection. At the end of this period the access point's internal
system makes a decision to enable/disable the reserve channel. By
default, the value 3 is specified.
A number of requests that will be sent in order to analyze the status
of the main connection when the connection is active (the access
point uses the main connection as a default gateway).
A number of requests that will be sent in order to analyze the status
of the main connection when the connection is inactive (the access
point uses the reserve connection as a default gateway).
Page 91 of 175
Configuring via Web-based Interface
Description
Advertisement
Table of Contents
