Siemens SOMATOM Emotion syngo CT 2007E Operator's Manual page 89

Safety
Overheating
syngo CT 2007E
02/2008
The possible causes of overheating are:
A . 3
Ambient temperature too high
Ventilation openings covered
Defective cooling system
Dirty air filters
For exchange of the air filters please refer to (→ System Owner
i
A
. 3
Manual)
If certain parts of the equipment overheat, a warning is dis-
played on the monitor.
In this case, finish the current measurement as quickly as
possible.
Mechanical Safety
Emotion Operator Manual
A . 3
A . 3
A . 3
0 . 0
A.3-7
0 . 0
0 . 0