Siemens SOMATOM Emotion syngo CT 2007E Operator's Manual page 239

System Description
syngo CT 2007E
02/2008
Support of postscript printers
A Siemens CT system is a medical device where under no cir-
cumstances other software than the released syngo CT soft-
ware may be installed. This also applies to printer drivers for
postscript printers.
Your software includes the generic Adobe Postscript Driver.
With this generic printer driver different postscript printers can
be connected to a Siemens CT system without the need of
installing any specific printer driver for the individual printer.
Siemens only allows the connection of a postscript printer via a
TCP/IP network port or locally at the parallel interface. Con-
nected postscript printers shall be used primarily for printing
the reports that are created in the different applications availa-
ble on the system. Postscript Printers might also be used to print
medical images. These printouts are not for diagnostic use.
Console
Emotion Operator Manual
B . 5
B . 5
B . 5
B . 5
0 . 0
B.5-23
0 . 0
0 . 0