Siemens SOMATOM Emotion syngo CT 2007E Operator's Manual page 474

Constancy Test
Performing the slice thick-
ness test
F.3-14
syngo CT 2007E
02/2008
The slice thickness is determined with the slice thickness phan-
tom. For each slice thickness, a tomogram of the phantom is
F . 3
recorded and the real slice thickness is calculated from this.
Press the Start key on the control box.
Scanning is started.
F . 3
After the previous test has been completed, the Slice test is
i
F . 3
started automatically.
An image of the slice thickness phantom is displayed in the
image area and the slice thickness is calculated. The procedure
is repeated automatically for all slice thicknesses.
Quality Assurance
Emotion Operator Manual
F . 3
F . 3
F . 3
F . 3
F . 3
0 . 0
0 . 0