Siemens SOMATOM Emotion syngo CT 2007E Operator's Manual page 119

Safety
syngo CT 2007E
02/2008
Curved cuts
If you want to view subareas that cannot be obtained by planar,
i.e. flat images, you can draw in a cut line with any curvature
freehand. You can then display this cut as an image in the out-
put segment. The orientation mark and the cutline are dis-
played as orientation aids.
CAUTION
Using non-planar slice images for diagnostic purposes!
Wrong diagnosis.
A . 4
Be careful when interpreting orientation labels. Keep the
shape of the curved cut and its orientation in the volume in
mind.
Software Related Safety Information
Emotion Operator Manual
A . 4
A . 4
A . 4
A . 4
A . 4
A . 4
0 . 0
A.4-25
0 . 0
0 . 0