Siemens SOMATOM Emotion syngo CT 2007E Operator's Manual page 440

Cleaning and Disinfecting
Cleaning the mouse
E.3-4
syngo CT 2007E
02/2008
You should clean the ball and rollers of the mouse from time to
E . 3
time to ensure proper functioning.
Release the ring around the ball under the mouse by turn-
ing it towards the arrows.
Remove the ball and the ring.
Blow out any dust and fluff and remove dust caught on the
rollers inside the mouse.
Clean the ball with clean water or a mild cleaning solution
and dry it with a clean, lint-free cloth.
Place the ball back in the housing of the mouse.
Replace the ring and turn it against the direction of the
arrows with two fingers until it locks into place.
Maintenance
Emotion Operator Manual
E . 3
E . 3
0 . 0
0 . 0