General Information - Siemens SOMATOM Emotion syngo CT 2007E Operator's Manual

CHAPTER
F.1
After switch on
Regular checks
Phantoms
syngo CT 2007E
02/2008
F . 0

General Information

To ensure a constantly high image quality, you must perform
quality measurements regularly.
Whenever you start the system, you can perform automatic
F . 1
checks and a series of warm-up scans. (→ Page D.1-8 System
checkup and calibration)
Quality tests are usually performed in several steps:
F . 1
Daily quality measurements
Monthly quality measurements (constancy test)
Camera test
CTDI test (once every six months)
Phantoms are used to perform quality measurements. You posi-
F . 1
tion these phantoms on the patient table prior to these tests.
Emotion Operator Manual
F . 1
F . 1
F . 1
F . 1
0 . 0
F.1-1
0 . 0
0 . 0