Siemens SOMATOM Emotion syngo CT 2007E Operator's Manual page 133

Safety
syngo CT 2007E
02/2008
Measurements
syngo InSpace 4D provides two different ways of measuring dis-
tances in an image:
Superimposing a two-dimensional grid.
Individual measurements
2D measurements are always performed on the same plane as
the volume view. The orientation of the object you are measur-
ing has to be parallel to the viewing plane of the screen.
CAUTION
Use of unsuitable measurement technique!
Inaccurate measurement possible.
A . 4
Use the grid method only for measurements in which the
viewing angle of the object does not matter (such as meas-
uring the diameter of a cylinder) or if the object can be ver-
ifiably oriented such that the desired measurement is par-
allel to the screen.
Software Related Safety Information
Emotion Operator Manual
A . 4
A . 4
A . 4
A . 4
A . 4
A . 4
A . 4
0 . 0
A.4-39
0 . 0
0 . 0