Walking Extension-Home Position Control - Panasonic KX-NS700 Feature Manual

2.24.3.3 Walking Extension-Home position control

Description
The Walking Extension and Enhanced Walking Extension features include the Home position control feature
which can be set through system programming.
The Enable/Disable setting for Home position control applies to both the Walking Extension and Enhanced
Walking Extension features.
Disable: Location Switch
The location of the extensions are switched.
Enable: Return to the home location
When the location of the extensions are switched via Walking Extension or Enhanced Walking Extension, they
are returned to their original locations (home locations).
When performing Walking Extension with this feature enabled, if you want to move your location permanently,
you must return your extension to its home location before moving.
When performing Enhanced Walking Extension with this feature enabled, the extension will return to its home
location when the status is changed to Service-out mode.
[Example]
Service-out
<Disable: Location Switch>
Location 1
Extn. 101
Location 2
Extn. 102
Explanation:
When an extension user enters Service-in mode at a location other than the home location, the location of the
extensions are switched.
This can be confusing for the user of the switched extension because the location of his/her extension may be
unknown.
Service-in
Service-out Extn. 101 Service-in Extn. 101 Service-in
Extn. 102
Extn. 101
2.24.3 Walking Extension Features
Extn. 101 Service-out
Extn. 102
Extn. 101
Feature Manual 291