Quick Vc Setup; Cli Quickvc Setup Script; Introduction; Instructions - 3Com OfficeConnect 3CP4144 Cli User's Manual

5
CLI QuickVC Setup
Script

Introduction

Instructions

Starting QuickVC Setup

ATM Parameters

Q VC S
UICK
This chapter will describe in detail the operations of the OfficeConnect Remote
812 VC Setup Wizard program. It will identify the required information, steps
involved, and sample output scripts from the execution of this program.
The CLI QuickVC Setup program allows you to quickly configure remote site
profiles (virtual channel connections) for your OfficeConnect Remote 812. Instead
of using cryptic commands you will simply respond to a series of questions
regarding different aspects of your configuration. The program will convert your
responses into the appropriate CLI commands and execute them.
The OfficeConnect Remote 812 can be configured as an ATM device. Depending
on the present configuration, the QuickVc script will prompt you for the
appropriate parameters.
This section contains the CLI QuickVC Setup script for all possible OfficeConnect
Remote 812 Virtual Channel (VC) configurations. You will be required to enter
information concerning network configurations. Questions in the CLI QuickVC
Setup script are presented here in tables.
Write the appropriate information for your desired configuration in the following
tables.
OCR-DSL> quickvc
Welcome to the OfficeConnect Remote 812 VC Setup Wizard
The VC Setup Wizard allows you to add and configure a VC profile on your
OfficeConnect Remote 812. Each profile must have a unique name.
Question
What is the name to be added?
The characteristics of the ATM Virtual Circuit must be configured.
Question
Enter the Virtual Path Identifier
Enter the Virtual Channel Identifier
Is the Category of Service (U)br or (C)br?
ETUP
Default
[ ]
Your System
Default Your System
[0]
[0]
[U]