3Com OfficeConnect 3CP4144 Cli User's Manual page 113

bridging [enable | disable]
default_route_option [enable | disable]
destination_address [ip address]
end_time [ HH:MM:SS ]
header_compression [none | TCPIP]
idle_timeout [seconds]
input_filter [filter_name]
ip [enable | disable]
ip_routing [listen | send | both | none]
ip_source_validation [enable | disable]
ipx [ enable | disable ]
ipx_address [ ipx_addr ]
ipx_routing [ all | listen | respond | send | none ]
ipx_wan [ enabled | disabled ]
local_IP_address [ip_net_address]
mac_routing [enable | disable]
MTU [number]
NAT_option [disable | enable]
NAT_default_address [ip_addr]
network_service [ppp | PPPLLC | RFC_1483]
output_filter [filter_name]
password [ password ]
remote_ip_address [ip_addr]
rip [ripv1 | ripv2]
rip_authentication [string]
rip_policies_update [rip_policies]
send_name [ ]
send_password ["text string"]
type [ONDEMAND | CONTINUOUS | MANUAL]
Specifies parameters for VCs.
Parameters Description
<vc_name> VC profile name.
address_ Determines how the IP address will be assigned for remote IP network
selection connections.
NEGOTIATE - learn the remote IP address.
SPECIFIED - uses IP address set in remote_IP_address value
bridging Enables/disables bridging across this link.
CLI Commands B-33