Show Adsl Transceiver_Status; Show Adsl Version; Show Bridge Network <Name; Show Bridge Settings - 3Com OfficeConnect 3CP4144 Cli User's Manual

show adsl
transceiver_status

show adsl version

show bridge network
<name>

show bridge settings

Total time since system reboot (hours, minutes, seconds)
Total time since last linkdown:
Errored seconds since last link down:
Total errored seconds in 15 minutes:
Total errored seconds in previous 15 minutes:
Displays the current status of the ADSL/ATM link.
Fields:
Operational Mode: either "loss of signal" or "operational".
Attenuation Upstream
Attenuation Downstream
Noise Margin Upstream
Noise Margin Downstream
Transmit Power (ATUR)
Transmit Power (ATUC)
Actual Negotiated Downstream Baud Rate:
Actual Negotiated Upstream Baud Rate:
Fields:
ADSL hardware release version: 0x3530
ADSL Alcatel chipset firmware release version: 141
counters [Received Frames, Transmit Frames, Discarded]
settings [Interface, Network Address, Frame Type, Status, User Name,
Spanning Tree Enabled]
Parameters Description
counters Displays information about the specified bridge network. It lists:
Received Frames - packet frames which have been received
Transmit Frames - packet frames which have been sent
Discarded - packet frames which have been thrown away
settings Displays information about the specified bridge network. You use add bridge
network to define bridge networks.
Interface - the interface this bridge is using
Network Address - index number for this bridge network
Frame Type - BRIDGE is the default
Status - ENABLED or DISABLED are options
User Name - user to supply parameters for this bridge
Spanning Tree Enabled - ENABLED or DISABLED
Displays the settings for all bridge networks. Use set bridge to modify these values.
Base Aging Time - time to age out a known MAC address, default 300
CLI Commands B-37