Show Ppp On Interface <Name> Settings - 3Com OfficeConnect 3CP4144 Cli User's Manual

B-48 A B: CLI COMMAND DESCRIPTION
PPENDIX
show ppp on interface
<name> settings
Number Active Links - sum of active links using this PPP bundle
Transmit Packets - sum of packets transmitted over this bundle
Bytes from Upper Layer - sum of bytes received from an upper layer
application for transmission over this bundle. This counter represents all
data handed down to the PPP application BEFORE compression occurs.
Bytes to Lower Layer - sum of bytes sent to a lower layer application for
transmission over this bundle. This counter represents all data to be handed
down to the lower layer application AFTER compression occurs.
Received Packets - sum of packets received from a lower layer application
over this bundle
Bytes to Upper Layer - sum of bytes to be handed up to an upper layer
application over this bundle
Bytes from Lower Layer - sum of bytes received from a lower layer
application over this bundle
Total Bad Headers - sum of packets with incorrect PPP Header (Address,
Control, PID Field)
COUNTERS for PPP LINK 1 - 5
Operational Status - not opened or opened
Received Packets - too long
Transmit Frames - sum of frames received from the PPP application for
transmission over this link
Bytes from Upper Layer - sum of bytes handed down from an upper layer
application for this link
Bytes to Lower Layer - sum of bytes received from a lower layer
application for this link
Received Frames - sum of frames received on this link
Bytes to Upper Layer - sum of bytes handed up to an upper layer
application over this link
Bytes from Lower Layer -sum of bytes received from a lower layer
application over this link
Displays the settings for PPP on the specified WAN interface.
SETTINGS for PPP BUNDLE 1
Operational Status - opened or not opened
Number Active Links - number of links active on this PPP bundle
User Profile - user whose parameters were used in creating links
Local MMRU - MRU the remote entity uses when sending packets to local
PPP entity. Default: 1514
Remote MMRU - MRU the local entity uses when sending packets to
remote PPP entity. Default: 1514
Local Endpoint Class - type of address used as the identifier