3Com OfficeConnect 3CP4144 Cli User's Manual page 85

add ipx service
[service_name]
Adds a static IPX service (for the LAN) to the IPX services table. You must supply
the name, internal ipx network number, node number, socket, and type of service
for this service. The user must also supply gateway information to indicate the
next router hop. To remove this service, use the delete ipx service command.
Parameters
service name
address
Gateway
metric
node
type
socket
Below is a partial list of the IPX services available:
address [internal network number]
gateway [network_number.mac_address]
metric [metric]
node [internal_node_number]
socket [socket_number]
type [service_type]
Description
Designation of IPX service.
Internal network number for the IPX service on which this service resides.
Address of the router you defined as the gateway.
An integer representing how far away the default router is, in "hops" through
other routers. Values: 1-15.
The internal MAC address of the server on which the service resides. This is
typically 00:00:00:00:00:01.
Type of service: hex number referring to file server, print server, etc. Refer to
the table below.
Socket number that the service uses.
Type
04
05
07
09
0A
21
2E
47
4B
4C
7A
98
9A
9E
107
111
166
26A
26B
Description
file server
job server
print server
archive server
job queue
NAS SNA gateway
dynamic SAP
advertising print server
Btrieve VAP 5.0
SQL VAP
TES-NetWare VMS
NetWare access server
Named Pipes server
PortableNetWare-UNIX
NetWare 386
Test server
NetWare management
NetWare management
Time synchronization
CLI Commands B-5