3Com OfficeConnect 3CP4144 Cli User's Manual page 35

Sample Output Display
as Quick Setup Executes
Category of Service:
Peak Cell Rate:
IP:
Local WAN IP Address:
Remote WAN IP Address:
WAN Interface Type:
Address Translation (NAT):
RIP:
Remote is Default Gateway:
IPX:
IPX WAN Network Number:
IPX WAN RIP:
Bridging:
Question
Do you want to change any answers ?
Do you want to actually execute these commands?
OCR-DSL> add vc "name"
OCR-DSL>set vc "name" ip disable ipx disable bridging disable
OCR-DSL>set vc "name" network_service ppp
OCR-DSL>set vc "name" atm vpi 0 vci 0 category_of_service unspecified pcr 0
OCR-DSL>set vc "name" ip enable
OCR-DSL>set vc "name" remote_ip_address 0.0.0.0/C
OCR-DSL>set vc "name" local_ip_address 0.0.0.0
OCR-DSL>set vc "name" ip_routing listen rip ripv2
OCR-DSL>set vc "name" nat_option enable
OCR-DSL>set vc "name" ipx enable
OCR-DSL>set vc "name" ipx_enable ipx_address 00000000 ipx_routing all
OCR-DSL>set vc "name" bridging enable
OCR-DSL>
OCR-DSL>enable vc "name"
OCR-DSL>_save users
_SAVE USERS Complete
OCR-DSL>Spawned Process CFP 272016 /./QuickSetup.commands Completed
Successfully
h
OCR-DSL>
CLI QuickVC Setup Script
UBR
0
Enabled
Learned
Learned
Numbered
Enabled
no
yes
Enabled
Learned
Yes
Enabled
Default Your System
[no]
[yes]
5-5