PTO Drive Shaft
RIGHT
FRONT
175 to 225 in–lb
(20 to 25 N–m)
4
6
1.
Transmission assembly
2.
Cap screw (4 used)
WARNING
Do not start the engine and engage the PTO
switch when the PTO drive shaft is discon-
nected from the cutting deck (or implement). If
the engine is started and the PTO shaft is al-
lowed to rotate, serious personal injury and
machine damage could result. If the PTO drive
shaft is disconnected from the cutting deck (or
implement), remove fuse F1 (15 amp) from fuse
block to prevent unintentional engagement of
the PTO clutch.
Chassis
175 to 225 in–lb
(20 to 25 N–m)
5
2
3
Figure 18
3.
Roll pin (2 used)
4.
Lock nut (4 used)
Page 6 – 18
4
3
2
5.
6.
1
PTO drive shaft
Cutting deck gearbox
Groundsmaster 7200/7210