2. Remove the DC harness from the clip located on the drive bracket.
See Figure 8-11.
3. Push the drive bracket toward the disk drive bay, and gently flip it over.
Place it on top of the disk drive bay.
See Figure 8-12.
Disk drive bay
SCSI backplane
Figure 8-12 Diskette Cable
4. Disconnect the diskette cable from the diskette drive.
See Figure 8-12.
5. Disconnect the diskette cable from the SCSI backplane.
Major Subassemblies
Drive bracket
Diskette drive
Diskette cable
8
8-13