Figure 9-6 Placing The Drive Bracket On Top Of The Disk Drive - Sun Microsystems Ultra 1 140 Service Manual

Disk drive bay
SCSI cable
Diskette cable
Figure 9-6 Placing the Drive Bracket on Top of the Disk Drive
5. Disconnect the SCSI cable from the CD-ROM/tape drive.
See Figure 9-6.
6. Disconnect the peripheral power cable from the CD-ROM/tape drive (P3),
and from the diskette drive (P2) if any.
7. Disconnect the diskette cable from the diskette drive (if any).
8. Place the bracket on an antistatic surface.
Storage Devices
9
P2
P3
P4
9-7