Figure 10-21 Board Fan - Sun Microsystems Ultra 1 140 Service Manual

10
10.5.2 Replacing the System Board Fan
10-24
J0101
System board

Figure 10-21 Board Fan

1. Position the replacement system board fan on the system board.
See Figure 10-21.
2. Connect the system board fan connector to the system board at J0101.
3. Position the plastic cover on top of the system board fan, and insert the
middle leg into the board.
4. Replace the two screws to secure the plastic cover and system board fan to
the system board.
See Figure 10-20.
Sun Ultra 1 Series Service Manual—November 1995
Board fan