9.2.4 Replacing the Bracket into the Chassis
1. Place the drive bracket on top of the disk drive bay.
See Figure 9-8.
2. Connect the SCSI cable to the CD-ROM/tape drive (if present).
Disk drive bay
Figure 9-8
3. Connect the diskette cable to the diskette drive (if any).
See Figure 9-8.
4. Connect the peripheral power cable to the CD-ROM/tape drive (P3), and
to the diskette drive (P2) if any.
Storage Devices
SCSI cable
Diskette cable
Connecting the Cables from the CD-ROM/Tape and Diskette Drive
9
P2
P3
P4
9-9