Figure 8-10 Replacing The Fan/Speaker Bracket Into The Chassis - Sun Microsystems Ultra 1 140 Service Manual

8.3.2 Replacing the Speaker
1. Position the speaker in the fan/speaker bracket.
Make sure the speaker connectors are on the top. See Figure 8-10.
2. Insert the fan/speaker bracket into the chassis.
Make sure the tabs are lock into the chassis to ensure proper replacement.

Figure 8-10 Replacing the Fan/Speaker Bracket into the Chassis

3. Connect the speaker cable to the speaker connectors with a long-nose
plier.
See Figure 8-7. The speaker cable has two different connector sizes. These
connectors are keyed, to allow the correct connection to the speaker.
Major Subassemblies
Tabs
Fan power cable
Speaker cable
Fan/speaker bracket
Chassis
8
8-11