Sun Microsystems Ultra 1 140 Service Manual page 69

6.1 Powering Off the System
Power On and Off
Powering Off the System
Powering On the System
Before turning off system power, shut down the operating system. Failure to
shut down the operating system can result in loss of data.
1. Notify users that the system is going down.
2. Back up the system files and data.
3. Shut down the system.
4. Press the power switch to the stand-by mode at the left rear of the system.
The LED on the front of the system should not be lit and the fans should not
be running.
6
page 6-1
page 6-2
6-1