Replacing The Bracket Into The Chassis - Sun Microsystems Ultra 1 Series Upgrade Manual

2

Replacing the Bracket into the Chassis

1. Place the drive bracket on top of the disk drive bay (Figure 2-13).
Figure 2-13 Replacing the Drive Bracket in the Disk Drive Bay
2. Position the bracket in the chassis.
3. Slide the bracket toward the opening in the side of the chassis
(Figure 2-14).
Note – Hooks at the chassis base must lock into the bottom holes of the drive
bracket.
4. Replace the two screws securing the drive bracket to the chassis.
Removing Ultra 1 Series Internal Components 21