Table of Contents
Advertisement
•
Bike power settings: Power view: Set how you want to view your power data (Watts (W), Watts/kg (W/kg) or
% of FTP). Power, rolling average: Choose 1, 3, 5, 10, 15, 30 or 60 second rolling average of power data. Set
FTP value: Set your FTP (Functional Threshold Power) value. The setting range is 60 to 600 watts. Check power
zone limits: Check your power zone limits.
Bike power settings are visible only if you have paired the sensor. For more information on calibration, see
Polar LOOK Kéo Power Sensor Bluetooth® Smart.
•
GPS recording: Choose Off or On.
•
Calibrate power sensor: Power sensor calibration is visible only if you have paired the sensor. For more inform-
ation on calibration, see Polar LOOK Kéo Power Sensor Bluetooth ® Smart.
•
Bike settings: Used sensors: View all the sensors you have linked to the bike.
•
Calibrate altitude: Set the correct altitude. It is recommended to always manually calibrate altitude when you
know your current altitude.
•
Speed settings: Speed view: Choose km/h (kilometers per hour) or min/km(minutes per kilometer). If you
have chosen imperial units, choose mph (miles per hour) or min/mi (minutes per mile). Check speed zone limits:
Check the limits for each speed zone.
•
Automatic pause sett.: Automatic pause: Choose On or Off. If you set the automatic pause On, your session
is automatically paused when you stop moving. Activation speed: set the speed at which recording is paused.
•
Automatic lap: Choose Off, Lap distance or Lap duration. If you choose Lap distance, set the distance after
which each lap is taken. If you choose Lap duration, set the duration after which each lap is taken.
In training view, press and hold LIGHT to enter Quick menu. You'll find:
•
Lock buttons: Press START to lock buttons. To unlock, press and hold LIGHT.
•
Set front light on or off.
•
Set backlight on or off.
•
Calibrate power sensor: Power sensor calibration is visible only if you have paired the sensor. For more inform-
ation on calibration, see Polar LOOK Kéo Power Sensor Bluetooth ® Smart.
•
Calibrate altitude: Set the correct altitude. It is recommended to always manually calibrate altitude when you
know your current altitude.
•
Interval timer: Create time and/or distance based interval timers to precisely time work and recovery phases in
your interval training sessions.
•
Current location info*: Current location and the number of visible satellites.
•
Choose Set location guide on*, and press START. Location guide arrow view set on is displayed, and M460
goes to Back to Start view.
* This selection is only available if GPS is set on for the sport profile.
In pause mode, press and hold LIGHT to enter Quick menu. You'll find:
26
Advertisement
Table of Contents
