Polar Electro M460 User Manual page 30

Hide thumbs Also See for M460:
Table of Contents

Advertisement

If you have set the GPS function on in this sport profile and/or a compatible
M460 will automatically start searching for the signals.
Stay in the pre-training mode until M460 has found the GPS and sensor signals and your heart rate to
make sure your training data is accurate. To catch the GPS satellite signals, go outdoors and away from tall
buildings and trees. Keep your M460 still with the display facing upwards during the search. Hold the position
until M460 has found the satellite signals.
Finding GPS satelllite signals is faster with the help of assisted GPS (A-GPS). The A-GPS data file is automatically
updated to your M460 when you sync your M460 with the Flow web service via the FlowSync software. If the
A-GPS data file has expired or you haven't synced your M460 yet, more time may be needed for finding the
satellite signals. For more information, see
3. When M460 has found all the signals, press START. Recording started is displayed and you can start
training.
Heart rate: M460 has found your heart rate sensor signal, when your heart rate is shown.
GPS: The percentage value shown next to the GPS icon indicates when the GPS is ready. When it reaches 100
%, OK is displayed.
Cycling sensors: OK is shown next to the bike icon when M460 has found the sensor signals. If you have
linked sensors to more than one bike, you'll see a number next to the bike icon indicating the bike in use. M460
chooses the bike to which the nearest sensor is linked.
Example:
You've linked a speed sensor to Bike 1, and another speed sensor to Bike 2. Both bikes are nearby when you
enter the pre-training mode in M460. The speed sensor linked to Bike 1 is closer to the M460. Therefore, M460
chooses Bike 1 for the ride. Number 1 is shown next to the bike icon.
If you wanted to use Bike 2 instead, do either of the following:
Return to the time mode. Then, increase the distance between M460 and Bike 1 so that Bike 2 is the one
nearest to M460. Enter the pre-training mode again.
Touch the sensor in Bike 2 with M460.
Assisted GPS
(A-GPS).
30
Bluetooth ® Smart sensor
in use,

Advertisement

Table of Contents
loading

Table of Contents