Pcl Settings; Postscript Settings - Sharp MX-B201D Operation Manual

PCL Settings

Item
Symbol Set Select one of 35
sets.
Font Select one internal
or one external font.
Line Feed Code CR=CR; LF=LF;
FF=FF,
CR=CR+LF; LF=LF;
FF=FF,
CR=CR;
LF=CR+LF;
FF=CR+FF,
CR=CR+LF;
LF=CR+LF;
FF=CR+FF
Wide A4 Enable, Disable

PostScript Settings

The "PostScript Settings" are only effective when the PS3 expansion kit is installed.
Item
Print PS Errors Enable, Disable
Selections
This specifies which country's characters (PCL symbol set) are
assigned to certain of the symbols in the character code list. The
factory default setting is [PC-8].
This specifies which PCL font to use for printing. One font can be
specified from among the internal fonts. The factory default setting is
[0: Courier].
This specifies the line break code by means of a combination of the
"CR" (return) code, "LF" (line break) code, and "FF" (page break)
code. The factory default setting is printing based on the transmitted
code. The setting can be changed by selecting one of four
combinations.
This setting can be enabled to print 80 lines on A4 size paper with
each line 10CPI font (English characters). When the setting is
disabled (a checkmark does not appear), each line is 78 characters
long.
Selections
When this setting is enabled, an error description is printed each
time a PostScript error occurs.
Description
Description
- 43 -
WEB FUNCTIONS IN THE MACHINE