Using The Machine As A Network Printer - Sharp MX-B201D Operation Manual

SETUP IN A WINDOWS ENVIRONMENT

USING THE MACHINE AS A NETWORK PRINTER

Interface cables for connecting the machine to your computer are not included with the machine. Please
Note
purchase the appropriate cable for your computer.
1
Insert the LAN cable into the LAN
connector on the machine.
Use a network cable that is shielded.
2
Turn on the machine.
3
Insert the "Software CD-ROM" into
your computer's CD-ROM drive.
4
Click the "start" button, click "My
Computer" (
the CD-ROM icon (
• In Windows Vista/7, click the "Start" button,
click "Computer", and then double-click the
"CD-ROM" icon.
• In Windows 2000, double-click "My Computer"
and then double-click the CD-ROM icon.
5
Double-click the "setup" icon (
In Windows Vista/7, if a message screen appears
asking you for confirmation, click "Allow".
6
The "SOFTWARE LICENSE" window
will appear. Make sure that you
understand the contents of the license
agreement, and then click the "Yes"
button.
You can show the "SOFTWARE LICENSE"
Note
in a different language by selecting the
desired language from the language menu.
To install the software in the selected
language, continue the installation with that
language selected.
7
Read the message in the "Welcome"
window and then click the "Next"
button.
), and then double-click
).
).
8
Click the "Standard" button of the
"Connect via the network" menu.
9
Printers connected to the network are
detected. Select the machine and click
the "Next" button.
If the machine is not found, make sure that
Note
the machine is powered on and connected
to your computer and then search again. If
the machine is still not found, use the
custom installation procedure to directly
specify the IP address.
10
A confirmation window appears.
Check the contents and then click the
"Next" button.
- 12 -