Sharp MX-B201D Operation Manual page 67

USING THE NETWORK SCANNER FUNCTION
Sending an image by entering an e-mail address in an LDAP server
1
Press the [MODE SELECT] key to
select scanner mode.
The "SCAN" indicator
lights up to indicate that
scanner mode is selected.
2
Make sure that the "SCAN USING:
USB/NETWORK" is shown on the
display. Then press [OK] to enter
Scan to USB and Network Scan mode.
(The initial display will be
"SCAN USING: SCAN TO
USB".)
3
Place the original in the document
feeder tray or on the document glass.
For information on how to place the original, see
"IMAGE ORIENTATION AND STANDARD
ORIGINAL LOADING
4
Select "GLOBAL ADDRESS" using the
[ ] key ( ) or [
press the [OK] key.
5
Enter search characters and press the
[OK] key.
Destinations matching the
search characters will
appear.
To enter characters, see
"HOW TO ENTER
CHARACTERS" (p.68)
SCAN USING:
USB/NETWORK
ORIENTATION" (p.68).
] key ( ) and then
SCAN USING:
GLOBAL ADDRESS
GLOBAL ADD. SEARCH:
S
6
Press the [
to select the original size and then
press the [OK] key.
The original size changes as follows each time
the [ ] key (
"A4" → "B5" → "A5" → "8.5x14" → "8.5x13" →
"8.5x11" → "8.5x5.5".
7
Press the [OK] key and then [
( ) or [
colour mode (COLOUR, GRAY and
B/W) and exposure level.
(For the setting, see page 65.)
8
Press the [START] key (
scanning.
The original is scanned using the settings of
Note
the scan mode that has the "Default Scan
Mode" checkbox selected.
- 67 -
] key ( ) or [ ] key (
) or [ ] key ( ) is pressed:
] key ( ) to select the
) to begin
)
] key