6
PRINTING FROM
MACINTOSH
BASIC PRINTING
To use the machine as a printer for the Macintosh, the PS3 expansion kit (MX-PK10) must be installed and the
machine must be connected to a network. To install the PPD file and configure the printer driver settings, see the
software setup guide.
Before printing, make sure that the correct size of paper for your document has been loaded in the machine.
1
Start the application and open the
document that you wish to print.
2
Select "Print" from the application's
"File" menu.
3
Make sure that the correct printer is
selected.
The Print window varies depending on the
Note
operating system version, the printer driver
version, and the application.
4
Configure print settings.
The settings vary depending on the
Note
operating system version, the printer driver
version, and the application.
Click
next to
"Copies & Pages" and
select the settings that
you wish to configure
from the pull-down
menu. The
corresponding setting
screen will appear.
- 37 -
5
Click the "Print" button.
Printing begins.