Installing The Ps Display Fonts - Sharp MX-B201D Operation Manual

INSTALLING THE PS DISPLAY FONTS

The fonts used by the PS printer driver are contained in the "PRINTER UTILITIES" CD-ROM that accompanied the
PS3 expansion kit. Install these fonts as needed for the PS printer driver.
1
Insert the "PRINTER UTILITIES"
CD-ROM into your computer's
CD-ROM drive.
If your computer is configured for auto start on
the CD-ROM, proceed to step 4.
2
Click the "start" button, click "My
Computer" (
the CD-ROM icon (
• In Windows Vista/7, click the "Start" button,
click "Computer", and then double-click the
"CD-ROM" icon.
• In Windows 2000, double-click "My Computer",
and then double-click the CD-ROM icon.
3
Double-click the "setup" icon (
In Windows Vista/7, if a message screen appears
asking you for confirmation, click "Allow".
If the language selection screen appears
Note
after you double click the "setup" icon, select
the language that you wish to use and click
the "Next" button. (Normally the correct
language is selected automatically.)
), and then double-click
).
).
SETUP IN A WINDOWS ENVIRONMENT
4
Select the "PS Display Font"
checkbox and click the "Next" button.
Do not select "PS Printer Driver".
Caution
The PS printer driver for the machine
should only be installed from the
CD-ROM that accompanies the
network expansion kit.
5
Follow the on-screen instructions.
- 17 -