KEY OPERATOR PROGRAMS
The key operator programs are used to prohibit changes to the [Condition Settings] and to configure interface
settings.
●
"Default settings
" (p.47)
●
"Interface settings
CONFIGURING A SETTING IN THE KEY OPERATOR
PROGRAMS
1
Click [Key operator programs] in the
menu frame.
2
Click the desired setting.
:
Select the setting for which you wish to prohibit changes.
:
" (p.47)
Enable monitoring of data sent to the network port and set restrictions.
The "Default Settings"
screen of the [Key
operator programs] will
appear. If you wish to
select a setting in the
"Default Settings" screen,
go to step 3.
3
Make a selection for the setting in the
screen that appears.
"KEY OPERATOR PROGRAMS
See
(p.47) for descriptions of the settings.
4
Click [Submit] to store the entered
information.
- 46 -
"