E-MAIL STATUS AND E-MAIL
ALERT SETTINGS
These functions send information on machine use (print count, copy count, etc.) and error conditions (paper
misfeed, out of paper, out of toner, etc.) via e-mail to the administrator of the machine or the dealer.
INFORMATION SETUP
Machine identification information for the status and alert e-mail functions is configured in the "Information Setup"
screen. The entered information will be included in status and alert e-mail messages.
1
Click [Information] in the menu frame.
SMTP SETUP
The Status and alert e-mail functions use SMTP (Simple Mail Transport Protocol) to send e-mail. The following
procedure is used to set up the e-mail environment. This must be done by the system administrator or other person
familiar with the network.
1
Click [Services] in the menu frame.
The "Services Setup" screen will appear.
2
Click [SMTP].
The "Information Setup"
screen will appear.
2
Enter the machine information.
For detailed information, click the [Help] button in
the upper right-hand corner of the window.
3
Click [Submit] to store the entered
information.
3
Enter the information required to set
up the e-mail environment.
For detailed information, click the [Help] button in
the upper right-hand corner of the window.
4
Click [Submit] to store the entered
information.
- 48 -