Using The Ppd File - Sharp MX-B201D Operation Manual

USING THE PPD FILE

The PPD file enables the machine to print using the standard PS driver of the operating system, and can be used
when the optional PS3 expansion kit is installed. Install the PPD file as needed.
Use the Add Printer Wizard in Windows to install the PPD file.
Be sure to read the Readme file before installing the PPD file. The Readme file is in the "EnglishA" folder. For the
location of the folder, see step 4.
1
Click the "start" button, click "Control
Panel", click "Printers and Other
Hardware", and then click "Printers
and Faxes".
• In Windows Vista/7, click the "Start" button,
click "Control Panel" and then click "Printer".
• In Windows Server 2003, click the "Start"
button and then click "Printers and Faxes".
• In Windows 2000, click the "Start" button, select
"Settings", and then click "Printers".
2
Insert the "Software CD-ROM" into
your computer's CD-ROM drive.
3
Click "Add a printer" in "Printer
Tasks".
• In Windows Vista/7, click "Add a printer" from
the tool bar.
• In Windows 2000, double-click the "Add
Printer" icon.
The "Add Printer Wizard" will appear.
4
Follow the on-screen instructions.
When you are asked to specify the path of the
PPD file, enter the path as follows.
(Substitute the letter of your CD-ROM drive for
"R" in the following paths.)
Operating system
Windows 2000/XP/
Server 2003/2008/
Vista/7
- 18 -
PPD file path
R:\Drivers\Printer
\English\PPD\2KXPVista