Key Operator Programs - Sharp MX-B201D Operation Manual

KEY OPERATOR PROGRAMS

When "YES, NO" appears in the "Settings" column, "YES" is selected when a checkmark appears in the checkbox of
the item, and "NO" is selected when checkmark does not appear.
Default settings
Item
Prohibit Test YES, NO
Page Printing
Disable Default YES, NO
Setting Changes
Interface settings
Item
Hexadecimal YES, NO
Dump Mode
I/O Timeout 1- 60 - 999 (sec)
Emulation Auto*,
Switching PostScript*, PCL
Port Switching Switch at End
Method of Job, Switch
after I/O Timeout
Settings
This setting is used to prohibit printing of a printer test page.
This setting is used to prohibit changes to the default condition settings.
Settings
This program is used to print out the print data from the computer in
hexadecimal and in the corresponding text characters (based on ASCII
code). This allows you to check whether or not print data is being correctly
sent from the computer.
During reception of a print job, if remaining data is not received after the
time set here elapses, the port connection is broken and the next print job
is begun.
Select the printer language. When [Auto] is selected, the language is
automatically selected from the data sent to the printer. Unless errors occur
frequently, do not change the setting from [Auto] to another setting.
*Only when the PS3 expansion kit is installed.
Select the method for switching network ports.
Description
Description
- 47 -
WEB FUNCTIONS IN THE MACHINE