Settings And Programming Required For The Network Scanner Feature; G Settings Required For The Network Scanner Function - Sharp AR-NB2 Operation Manual

SETTINGS AND PROGRAMMING
REQUIRED FOR THE NETWORK
SCANNER FEATURE
To the Network Scanner feature, settings for the SMTP server, DNS server, and destination addresses must be
established.
To establish the settings, use a computer that is connected to the same network as the machine to access the
machine's Web page. The Web page can be displayed with your Web browser (Internet Explorer 5.5 or later, or
Netscape Navigator 6.0 or later).
SETTINGS REQUIRED FOR THE NETWORK SCANNER FUNCTION
To transmit images using the network scanner function, configure the settings in the Web pages as follows:
1
Scan to FTP Scan to FTP (Hyperlink) Scan to E-mail Scan to Desktop
Access the Web pages (p.6)
Configure basic settings for network scanning (p.8)
Configure your SMTP and DNS server settings (p.9)
Configure LDAP server settings
(when using an LDAP server) (p.10)
Storing scanning settings (p.11)
Store destination information (p.12 to 15)
Assigning destinations to the scan menu keys on the machine (p.17)
The following settings can also be configured to enable convenient use of the network scanner function:
• Changing the Web page language (p.6) • Setting passwords. (p.18)
- 5 -