Printing Using The Ipp Function - Sharp MX-B201D Operation Manual

SETUP IN A MACINTOSH ENVIRONMENT

Printing using the IPP function

The machine can print using the IPP function. When the machine is in a remote location, this function can be used in
place of the fax function to print a higher quality image than a fax. If you wish to use the IPP function, follow these
steps to select the PPD file when configuring the printer driver.
v10.4.11, v10.5 - 10.5.8, v10.6 - 10.6.4
(1) Click the [IP Printer] icon.
If you are using Mac OS X v10.5 to 10.5.8 or v10.6
to 10.6.4, click the [IP] icon.
(2) Select [Internet Printing Protocol] in
"Protocol". Enter the address of the machine (IP
address or domain name) and the queue name.
Enter "ipp" in "Queue".
(3) Select [Sharp] in "Print Using" and click the
PPD file of your model.
If you are using Mac OS X v 10.5 to 10.5.8 or v10.6
to 10.6.4, select [Select a driver to use] (or [Select
Printer Software]) from "Print Using" and click the
PPD file for your model.
(4) Click the [Add] button.
The "Installable Options" screen will appear. Make
sure that the settings are correct and click the
[Continue] button.
v10.2.8, v10.3.9
(1)
(2)
(3)
(4)
(1) Select [IP Printing].
(2) Select [Internet Printing Protocol] in "Printer
Type". Enter the address of the machine (IP
address or domain name) and the "Queue
Name".
• If you are using Mac OS X v10.2.8, enter the
address of the machine (IP address or domain
name) in "Printer's Address".
• Enter "ipp" in "Queue Name".
(3) Select [Sharp] in "Printer Model" and click the
PPD file of your model.
(4) Click the [Add] button.
- 22 -
(1)
(2)
(3)
(4)