D-Link DAP-600P User Manual page 9

DAP-600P Wireless AC2600 Wave 2 MU-MIMO Dual Band
PoE Access Point / Router
User Manual
Software
Network functions
Firewall functions
VPN
Management and monitoring
·
DHCP server/relay
·
Advanced configuration of built-in DHCP server
·
Stateful/Stateless mode for IPv6 address assignment, IPv6 prefix delegation
·
Automatic obtainment of LAN IP address (for access point/repeater/client
modes)
·
DNS relay
·
Dynamic DNS
·
Static IPv4/IPv6 routing
·
IGMP Proxy
·
RIP
·
Support of UPnP IGD
·
Support of VLAN
·
WAN ping respond
·
Support of SIP ALG
·
Support of RTSP
·
WAN failover
·
Autonegotiation of speed, duplex mode, and flow control / Manual speed and
duplex mode setup for each Ethernet port
·
Built-in UDPXY application
·
Network Address Translation (NAT)
·
Stateful Packet Inspection (SPI)
·
IPv4/IPv6 filter
·
MAC filter
·
URL filter
·
DMZ
·
Virtual servers
·
Built-in Yandex.DNS web content filtering service
·
Built-in SkyDNS web content filtering service
·
IPsec/PPTP/L2TP/PPPoE pass-through
·
PPTP/L2TP tunnels
·
IPsec tunnels
Transport/Tunnel mode
IKEv1/IKEv2 support
DES encryption
NAT Traversal
Support of DPD (Keep-alive for VPN tunnels)
·
Local and remote access to settings through SSH/TELNET/WEB
(HTTP/HTTPS)
·
Bilingual web-based interface for configuration and management
(Russian/English)
·
Notification on connection problems and auto redirect to settings
·
Firmware update via web-based interface
·
Automatic notification on new firmware version
·
Saving/restoring configuration to/from file
·
Support of logging to remote host
·
Automatic synchronization of system time with NTP server and manual
time/date setup
·
Ping utility
·
Traceroute utility
·
TR-069 client
·
SNMP agent (SNMPv2/v3)
·
Schedules for filters rules, automatic reboot, and enabling/disabling wireless
network
·
Automatic upload of configuration file from ISP's server (Auto Provision)
Page 9 of 235
Overview