D-Link DAP-600P User Manual page 103

DAP-600P Wireless AC2600 Wave 2 MU-MIMO Dual Band
PoE Access Point / Router
User Manual
Figure 88. The page for creating a new PPPoE connection. The Miscellaneous section.
Parameter
NAT
RIP
Ping
When all needed settings are configured, click the APPLY button.
After clicking the button, the window for creating an additional connection opens.
If your ISP offers access to local services (e.g. audio and video resources), select the create a new
connection choice of the radio button. Then click the OK button. On the page displayed, specify
the parameters for the connection of the Dynamic IPv4 or Static IPv4 type and click the APPLY
button. Click the BACK button to specify other settings for the connection of the PPPoE type.
If you do not need to create an additional connection, click the SKIP button. In this case, the
Connections Setup / WAN page opens.
Miscellaneous
If the switch is moved to the right, the network address translation
function is enabled. Do not disable the function unless your ISP
requires this.
Move the switch to the right to allow using RIP for this connection.
If the switch is moved to the right, the access point responds to ping
requests from the external network through this connection. For
security reasons, it is recommended to disable this function.
Page 103 of 235
Configuring via Web-based Interface
Description