D-Link DAP-600P User Manual page 7

DAP-600P Wireless AC2600 Wave 2 MU-MIMO Dual Band
PoE Access Point / Router
User Manual
The "client" function is available in both modes and allows using DAP-600P as a wireless client
and a wireless repeater in the access point mode and as a WISP repeater in the router mode.
The SSH protocol support provides more secure remote configuration and management of the
access point due to encryption of all transmitted traffic, including passwords.
Now the schedules are also implemented; they can be applied to the rules of various filters and used
to reboot the access point at the specified time or every specified time period and to enable/disable
the wireless network.
You can configure the settings of the DAP-600P device via the user-friendly web-based interface
(the interface is available in two languages – in Russian and in English).
The configuration wizard allows you to connect DAP-600P to a wired or wireless ISP (when
switched to the router mode) in several simple steps or quickly set needed parameters for operation
as an access point, repeater, or client (when switched to the access point mode).
You can simply update the firmware: when the Internet access is provided, the access point itself
finds approved firmware on D-Link update server and notifies when ready to install it.
Page 7 of 235
Overview