D-Link DAP-600P User Manual page 107

DAP-600P Wireless AC2600 Wave 2 MU-MIMO Dual Band
PoE Access Point / Router
User Manual
Figure 91. The page for creating a new L2TP over IPsec connection. The IPsec section.
!
Setting for both parties which establish the tunnel should be the same.
Parameter
Pre-shared key
Enable PFS
Specify connection
port
IPsec (for the L2TP over IPsec type only)
A key for mutual authentication of the parties.
( ) to display the entered key.
Move the switch to the right to enable the PFS option (Perfect
Forward Secrecy). If the switch is moved to the right, a new
encryption key exchange will be used upon establishing the IPsec
tunnel. This option enhances the security level of data transfer, but
increases the load on DAP-600P.
Move the switch to the right to change the port used for data
exchange with the other party enter the needed value in the Port
filed displayed. By default, the value 1701 is specified.
Page 107 of 235
Configuring via Web-based Interface
Description
Click the Show icon