D-Link DAP-600P User Manual page 81

DAP-600P Wireless AC2600 Wave 2 MU-MIMO Dual Band
PoE Access Point / Router
User Manual
Parameter
Mode of dynamic IP
address assignment
Start IP
End IP
Lease time
DNS relay
External DHCP server IP
Dynamic IP Addresses
An operating mode of the access point's DHCP server.
•
Disable: The access point's DHCP server is disabled,
clients' IP addresses are assigned manually.
•
Server: The access point assigns IP addresses to clients
automatically in accordance with the specified parameters.
When this value is selected, the Start IP, End IP, Lease
time fields and the DNS relay switch are displayed on the
tab. Also when this value is selected, the DHCP Options,
Static IP Addresses, and Hosts sections are displayed on
the tab.
• Relay: An external DHCP server is used to assign IP
addresses to clients. When this value is selected, the
External DHCP server IP, Option 82 Circuit ID,
Option 82 Remote ID, and Option 82 Subscriber ID
fields are displayed on the tab. Available if the Router or
WISP Repeater mode was selected in the Initial
Configuration Wizard.
The start IP address of the address range used by the DHCP server to
distribute IP addresses to clients.
The end IP address of the address range used by the DHCP server to
distribute IP addresses to clients.
The lifetime of IP addresses leased by the DHCP server. At the end
of this period the leased IP address is revoked and can be distributed
to another device, unless the previous device has confirmed the need
to keep the address.
Move the switch to the right so that the devices connected to the
access point obtain the address of the access point as the DNS server
address.
Move the switch to the left so that the devices connected to the
access point obtain the address transmitted by the ISP or specified on
the Advanced / DNS page as the DNS server address.
The IP address of the external DHCP server which assigns IP
addresses to the access point's clients.
Page 81 of 235
Configuring via Web-based Interface
Description