Connecting To Mobile Device With D-Link Assistant Application - D-Link DAP-600P User Manual

DAP-600P Wireless AC2600 Wave 2 MU-MIMO Dual Band
PoE Access Point / Router
User Manual

Connecting to Mobile Device with D-Link Assistant Application

1. Connect the power adapter (not included in the delivery package) to the power connector
port on the back panel of the access point, then plug the power adapter into an electrical
outlet or power strip.
2. Make sure that the Wi-Fi connection on your mobile device is on. To switch it on, go to the
mobile device settings.
3. In the list of available wireless networks on your mobile device, select the wireless network
DAP-600P (for operating in the 2.4GHz band) or DAP-600P-5G (for operating in the
5GHz band).
4. In the opened window, enter the network key (see WPS PIN on the barcode label on the
bottom panel of the device) as the password and connect to the wireless network of DAP-
600P.
5. In the settings of the wireless network DAP-600P (for operating in the 2.4GHz band) or
DAP-600P-5G (for operating in the 5GHz band) on your mobile device, in the IP
Settings field, select the Static value (for Android) or the Manual value (for iOS).
6. Enter the value 192.168.0.51 in the IP address field. For iOS devices, also specify the
subnet mask 255.255.255.0. Confirm the changed settings.
7. Launch D-Link Assistant application on your mobile device. The application is available for
Android and iPhone smartphones in AppStore and Google Play.
D-Link Assistant for Android
2 Field names may vary in different versions of operating systems on mobile devices.
D-Link Assistant for iOS
Page 18 of 235
Installation and Connection
2