D-Link DAP-600P User Manual page 195

DAP-600P Wireless AC2600 Wave 2 MU-MIMO Dual Band
PoE Access Point / Router
User Manual
You can specify the following parameters:
Parameter
Enable
Template
Interface
Protocol
Figure 145. The page for adding a virtual server.
General Settings
Move the switch to the right to enable the server.
Move the switch to the left to disable the server.
Select a virtual server template from the drop-down list, or select
Custom to specify all parameters of the new virtual server
manually.
A WAN connection to which this virtual server will be assigned.
A protocol that will be used by the new virtual server. Select a value
from the drop-down list.
Page 195 of 235
Configuring via Web-based Interface
Description