D-Link DAP-600P User Manual page 80

DAP-600P Wireless AC2600 Wave 2 MU-MIMO Dual Band
PoE Access Point / Router
User Manual
Parameter
Mode of local IP
address assignment
IP address
Mask
Gateway IP address
Hostname
Figure 65. Configuring the local interface. The IPv4 tab. The Dynamic IP Addresses section.
Local IP Address
Available if the Access point or Repeater mode was selected in
the Initial Configuration Wizard.
Select the needed value from the drop-down list.
•
Static: The IPv4 address, subnet mask, and the gateway IP
address are assigned manually.
•
Dynamic: The access point automatically obtains these
parameters from the LAN DHCP server or from the router to
which it connects.
The IPv4 address of the access point in the local subnet. By default,
the following value is specified: 192.168.0.50.
The mask of the local subnet. By default, the following value is
specified: 255.255.255.0.
Available if the Access point or Repeater mode was selected in
the Initial Configuration Wizard.
The gateway IPv4 address which is used by the access point to
connect to the Internet (e.g., for synchronizing the system time with
an NTP server). Optional.
The name of the device assigned to its IPv4 address in the local
subnet.
Page 80 of 235
Configuring via Web-based Interface
Description